Home> Products> Hydraulic Nuts> NMS Hydraulic Nuts> Precision K-type Axial Lock Nuts
Precision K-type Axial Lock Nuts
Precision K-type Axial Lock Nuts
Precision K-type Axial Lock Nuts
Precision K-type Axial Lock Nuts
Precision K-type Axial Lock Nuts
Precision K-type Axial Lock Nuts
Precision K-type Axial Lock Nuts
Precision K-type Axial Lock Nuts

Precision K-type Axial Lock Nuts

$143-2860 /set

Payment Type:L/C,D/P,D/A,T/T,MoneyGram
Min. Order:1 set
Port:Shanghai
Product Attributes

Product NameHydraulic Nuts

Place Of OriginChina (Mainland)

MaterialSteel

Bolt RangeM50*1.5 - Tr1000*8

Stroke5-34mm

ApplicationRemove the bearing

CertificateIso9001:2008

MOQ1 Set

ColorSilver

Warranty1 Year

Packaging & Delivery
Selling Units : set
Package Type : Wooden case
Precision K-type Axial Lock Nuts1
Product Description

The hydraulic nut consists of a nut body, a pressure ring, an oil filling port and an oil discharge and exhaust joint. Clean the appearance of the nut when using it. Screw the nut into the workpiece and lock the nut, the pressure ring should be in the original position, then insert the oil filling hose interface of the hand pump into the oil filling port, lock the unloading switch handle on the right side of the hand pump, slowly pressurize, and drain the oil at the same time The air release cap on the upper part of the exhaust joint is turned inward, and the air is released until the air in the nut is exhausted, HMV Hydraulic Nuts price and clean hydraulic oil flows out. Press out to achieve the purpose of pressing, until the pressure reaches your desired pressing purpose. Loosen the unload switch handle and release the pressurized hose connector of the hand pump.HMV Hydraulic Nuts

Products Description
Features of Hydraulic Nuts
1
Commonly used in bearings, flywheels, propellers and other workpiece presses hydraulic tools.
2
With the resulting top thrust is smooth, no impact, the process does not hurt the workpiece and other characteristics.
3
Through the hydraulic nut inner thread, which can be installed in the shaft parts, the piston under the action of 700bar hydraulic pressure to push the workpiece to the installation position.

Home> Products> Hydraulic Nuts> NMS Hydraulic Nuts> Precision K-type Axial Lock Nuts
Send Inquiry
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send